Al | Aluminium
Analysis
2.00 µg/l
Setpoint
0 - 60 µg/l
ICP-OES Laboratory Seawater Analysis
Dashboard
Choose your Habitat here
Choose your Problem here
Analysis and recommendations
| Unwanted heavy metals | Analysis | Setpoint | ||
|---|---|---|---|---|
| Al Aluminium | Aluminium | 2.00 µg/l | 0 - 60 µg/l | |
| Sb Antimony | Antimony | 0.00 µg/l | 0 µg/l | |
| As Arsenic | Arsenic | 0.00 µg/l | 0 µg/l | |
| Bi Bismuth | Bismuth | 0.00 µg/l | 0 µg/l | |
| Pb Lead | Lead | 0.00 µg/l | 0 µg/l | |
| Cd Cadmium | Cadmium | 0.00 µg/l | 0 µg/l | |
| Cs Caesium | Caesium | 0.00 µg/l | 0 µg/l | |
| Ga Gallium | Gallium | 0.00 µg/l | 0 µg/l | |
| In Indium | Indium | 0.00 µg/l | 0 µg/l | |
| Cu Copper | Copper | 0.00 µg/l | 0 µg/l | |
| La Lanthanum | Lanthanum | 0.00 µg/l | 0 µg/l | |
| Hg Mercury | Mercury | 0.00 µg/l | 0 µg/l | |
| Sc Scandium | Scandium | 0.00 µg/l | 0 µg/l | |
| Ag Silver | Silver | 0.00 µg/l | 0.1 µg/l | |
| Se Selenium | Selenium | 0.00 µg/l | 0 µg/l | |
| Te Tellurium | Tellurium | 0.00 µg/l | 0 µg/l | |
| Ti Titanium | Titanium | 0.00 µg/l | 0 µg/l | |
| W Tungsten | Tungsten | 0.00 µg/l | 0 µg/l | |
| Sn Tin | Tin | 0.00 µg/l | 0 µg/l |
Sb | Antimony
Analysis
0.00 µg/l
Setpoint
0 µg/l
As | Arsenic
Analysis
0.00 µg/l
Setpoint
0 µg/l
Bi | Bismuth
Analysis
0.00 µg/l
Setpoint
0 µg/l
Pb | Lead
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cd | Cadmium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cs | Caesium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ga | Gallium
Analysis
0.00 µg/l
Setpoint
0 µg/l
In | Indium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Cu | Copper
Analysis
0.00 µg/l
Setpoint
0 µg/l
La | Lanthanum
Analysis
0.00 µg/l
Setpoint
0 µg/l
Hg | Mercury
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sc | Scandium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ag | Silver
Analysis
0.00 µg/l
Setpoint
0.1 µg/l
Se | Selenium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Te | Tellurium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Ti | Titanium
Analysis
0.00 µg/l
Setpoint
0 µg/l
W | Tungsten
Analysis
0.00 µg/l
Setpoint
0 µg/l
Sn | Tin
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Macro-Elements | Analysis | Setpoint | ||
|---|---|---|---|---|
| Cl Chloride | Chloride | 19871.00 mg/l | 19500 mg/l | |
| Na Sodium | Sodium | 10930.00 mg/l | 10000 - 11300 mg/l | |
| Ca Calcium | Calcium | 448.00 mg/l | 415 - 520 mg/l | |
| Mg Magnesium | Magnesium | 1362.00 mg/l | 1320 - 1500 mg/l | |
| K Potassium | Potassium | 385.00 mg/l | 380 - 480 mg/l | |
| Br Bromide | Bromide | 65.00 mg/l | 64 mg/l | |
| B Boron | Boron | 4.00 mg/l | 4.5 mg/l | |
| F Fluoride | Fluoride | 0.78 mg/l | 1.3 mg/l | |
| Sr Strontium | Strontium | 6.00 mg/l | 8 - 12 mg/l | |
| S Sulphur | Sulphur | 892.00 mg/l | 900 mg/l |
Cl | Chloride
Analysis
19871.00 mg/l
Setpoint
19500 mg/l
Na | Sodium
Analysis
10930.00 mg/l
Setpoint
10000 - 11300 mg/l
Ca | Calcium
Analysis
448.00 mg/l
Setpoint
415 - 520 mg/l
Mg | Magnesium
Analysis
1362.00 mg/l
Setpoint
1320 - 1500 mg/l
K | Potassium
Analysis
385.00 mg/l
Setpoint
380 - 480 mg/l
Br | Bromide
Analysis
65.00 mg/l
Setpoint
64 mg/l
B | Boron
Analysis
4.00 mg/l
Setpoint
4.5 mg/l
F | Fluoride
Analysis
0.78 mg/l
Setpoint
1.3 mg/l
Sr | Strontium
Analysis
6.00 mg/l
Setpoint
8 - 12 mg/l
S | Sulphur
Analysis
892.00 mg/l
Setpoint
900 mg/l
| Li-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Li Lithium | Lithium | 195.00 µg/l | 200 µg/l | |
| Ni Nickel | Nickel | 0.00 µg/l | 5 µg/l | |
| Mo Molybdenum | Molybdenum | 4.00 µg/l | 12 µg/l |
Li | Lithium
Analysis
195.00 µg/l
Setpoint
200 µg/l
Ni | Nickel
Analysis
0.00 µg/l
Setpoint
5 µg/l
Mo | Molybdenum
Analysis
4.00 µg/l
Setpoint
12 µg/l
| I-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| V Vanadium | Vanadium | 0.00 µg/l | 0 - 3 µg/l | |
| Zn Zinc | Zinc | 3.00 µg/l | 0 - 5 µg/l | |
| Mn Manganese | Manganese | 4.00 µg/l | 0 - 3 µg/l | |
| I Iodine | Iodine | 37.00 µg/l | 30 - 90 µg/l |
V | Vanadium
Analysis
0.00 µg/l
Setpoint
0 - 3 µg/l
Zn | Zinc
Analysis
3.00 µg/l
Setpoint
0 - 5 µg/l
Mn | Manganese
Analysis
4.00 µg/l
Setpoint
0 - 3 µg/l
I | Iodine
Analysis
37.00 µg/l
Setpoint
30 - 90 µg/l
| Fe-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Cr Chromium | Chromium | 0.00 µg/l | 0 µg/l | |
| Co Cobalt | Cobalt | 0.00 µg/l | 0 µg/l | |
| Fe Iron | Iron | 4.00 µg/l | 0 µg/l |
Cr | Chromium
Analysis
0.00 µg/l
Setpoint
0 µg/l
Co | Cobalt
Analysis
0.00 µg/l
Setpoint
0 µg/l
Fe | Iron
Analysis
4.00 µg/l
Setpoint
0 µg/l
| Ba-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Ba Barium | Barium | 65.00 µg/l | 0 - 10 µg/l | |
| Be Beryllium | Beryllium | 0.00 µg/l | 0 µg/l |
Ba | Barium
Analysis
65.00 µg/l
Setpoint
0 - 10 µg/l
Be | Beryllium
Analysis
0.00 µg/l
Setpoint
0 µg/l
| Si-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| Si Silicon | Silicon | 152.00 µg/l | 0 - 200 µg/l |
Si | Silicon
Analysis
152.00 µg/l
Setpoint
0 - 200 µg/l
| Nutrient-Group | Analysis | Setpoint | ||
|---|---|---|---|---|
| P Phosphorus | Phosphorus | 38.00 µg/l | 6 - 23 µg/l | |
| PO4 Phosphate | Phosphate | 0.116 mg/l | 0.018 - 0.07 mg/l |
P | Phosphorus
Analysis
38.00 µg/l
Setpoint
6 - 23 µg/l
PO4 | Phosphate
Analysis
0.116 mg/l
Setpoint
0.018 - 0.07 mg/l
| Salinity | Analysis | Setpoint | ||
|---|---|---|---|---|
| Sal Salinity | Salinity | 35.085 PSU | 35 PSU |
Sal | Salinity
Analysis
35.085 PSU
Setpoint
35 PSU
P
Your Phosphorus / phosphate levels are too high.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common reasons (sorted in descending order of frequency):
1. Overfeeding, especially with dry food or not washed-frozen foods
2. No Phosphate Remover in the system
3. Too much vegetable food
4. Too little flow, "Gammel corners" in the aquarium
5. Weak filtration / skimming
6. use of supplements to increase nutrients
Renew or increase PO4 media, feed less, wash frozen food, avoid dried foods (flakes or pellets)
Ba
Your Barium levels are slightly elevated.
Check for possible contamination source. To help you in your search for the source of error, we have listed the most common sources of Barium (sorted in descending order of frequency):
1. Phosphate iron-based (except ROWAphos or PhosBan)
2. Contaminated salts
3. Contaminated trace elements, in particular strontium
4. Dried fishfood
Monitor with future ICP-OES tests.
Use TRITON AL99 PO4 remover to remove Barium
Fe
Your Iron levels are slightly elevated.
Check for possible contamination source. To help you in finding the source of error, we have listed the most common sources of iron (sorted in descending order of frequency):
1. Trace element overdose / contamination
2. Metals near or in the aquarium (as rusty clamps or screws)
3. Iron based Phosphate remover (too much flow in reactor)
4. Low pH in the aquarium
To remedy this we recommend carrying out 6 x 15% water changes Red Sea Salt (blue bucket), spread over 6 weeks
Very important for your aquarium
Mg
We have detected a lack of magnesium.
A magnesium dosage can have the following benefits for your aquarium:
- Essential for calcification
- Important for the development of healthy coral skeleton of SPS and LPS corals
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 42.42g for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
K
We have detected a lack of potassium.
A potassium dose may have the following advantages for your aquarium:
- Can promote the coloring of SPS
- Can have a positive effect on the bacterial flora
To restore the natural value, they refer to our recommended dosage.
We recommend the corrective dosage of 15.14g for 1 day.
If you have the 1000ml version please visit this link to re-calculate your dosage.
Important for your aquarium
B
We have detected a lack of boron.
A boron dosage can have the following benefits for your aquarium:
- Stabilization of the pH value in the aquarium
- Can promote the colour and health of SPS and LPS
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 52.5ml. On the last day please use 13.13ml.
Sr
We have detected a lack of strontium.
A strontium dose may have the following advantages for your aquarium:
- Can positively affect coral health
- Important for the development of healthy coral skeleton
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 10.5ml. On the last day please use 2.15ml.
If you have the 1000ml version please visit this link to re-calculate your dosage.
We recommend a daily maintenance dose of 0.42ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
I
We have detected a lack of iodine.
A Iodine dose can have the following benefits for your aquarium:
- Improves overall health of SPS corals and macroalgae
- Promotes metabolic processes in the reef aquarium
- Can be helpful against parasites and inhibit their reproduction
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage of 2.42ml for 1 day.
We recommend a daily maintenance dose of 0.24ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Basic )
Mo
We have detected a lack of molybdenum.
A molybdenum dose may have the following advantages for your aquarium:
- Can promote enzymatic processes in the reef aquarium
- Can promote the color of SPS and LPS
- Too high a dosage of molybdenum can be detrimental to the aquarium, please dose carefully.
To restore the natural value, please refer to our recommended dosage.
We recommend the corrective dosage be carried out over 2 days. For the first day the dosage should be 26.25ml. On the last day please use 15.75ml.
V
We have detected a lack of vanadium.
A vanadium dosage may have the following advantages for your aquarium:
- Can have a positive effect on the growth of sponges, sea squirts and SPS and LPS corals
- Can promote a better polyp extension
- May intensify the color of Acropora and Montipora
To restore the natural value, please note our dosing recommendation.
To keep this value, please note our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose meter (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test).
4. Test: see above. Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0.
We recommend the corrective dosage of 0.63ml for 1 day.
We recommend a daily maintenance dose of 0.04ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Fine-tuning Level 1 ( Advanced )
Ni
Warning, dangerous element for the aquarium. Dosage for professional, experienced aquarists only!
A nickel dose may have the following advantages for your aquarium:
- Can improve the color image of coral
- Can improve the overall health of LPS and SPS corals
Attention, the concentration of nickel in natural seawater is so low that it can not be detected. If a dose is desired, begin with the recommended dosage listed below and test the value regularly in our laboratory. If nickel are detected, they have overdosed and should adjust the dose immediately. You can increase the dosage of nickel slowly until they see a positive effect.
We recommend the corrective dosage be carried out over 3 days. For the first 2 days the daily dosage should be 10.5ml. On the last day please use 5.25ml.
Zn
We have detected a lack of zinc.
A zinc dosage may have the following advantages for your aquarium:
- Can promote enzymatic processes in reef aquariums
- Can promote color and health of LPS and SPS corals
To restore the natural value, please refer to our recommended dosage.
To keep this value, please refer to our maintenance dose. For calculating the maintenance dose proceed as follows:
1st Test: dose maintenance dose xml
2nd Test: old maintenance dosing xml (from the 1st test) + new maintenance dose (from the 2nd test) XML.
3. Test:: old maintenance dosing xml (from the 1st test) + old maintenance dosing xml (from the 2nd test) + new maintenance dose xml meter (from the 3rd Test). Thereafter, the dosage should not be increased, even though the analysis indicates a value of 0
We recommend the corrective dosage of 0.53ml for 1 day.
We recommend a daily maintenance dose of 0.05ml. If this dose is very low, then this can be alternatively be dosed weekly (daily dose x7).
Select your country and buy the products here
-
1x Triton Reagents Magnesium 1000g
0
-
1x Triton Reagents Potassium 1000g
0
-
1x Triton Reagents Boron 1000ml
0
-
1x Triton Reagents Fluorine 1000ml
0
-
1x Triton Reagents Strontium 100ml - 10x concentrate
0
-
1x Triton Reagents Sulphate 1000g
0
-
1x Triton Reagents Lithium 100ml
0
-
1x Triton Reagents Nickel 100ml
0
-
1x Triton Reagents Molybdenum 100ml
0
-
1x Triton Reagents Vanadium 100ml
0
-
1x Triton Reagents Zinc 100ml
0
-
1x Triton Reagents Iodine 100ml
0